Filter
Top Products
Default Volume Control
You can set a permanent loudness level for any volume control setting. The level
will remain at this volume (referred to as the default setting) until you change the
setting.
·
To set a permanent speaker,
headset, handset, or group listening
loudness for all future calls,
1. PRESS INTERCOM.
2. ACTIVATE speaker, headset, handset, or
group listen mode to be affected.
3. While in that mode, PRESS VOLUME UP or
VOLUME DOWN button to adjust loudness.
4. DIAL
**7 ORPRESS programmed
SAVEbuttonto hold the loudness at the last
setting for all future calls (until you change
the default again).
5. REPEAT this procedure in each mode until you’ve set all default
volume levels.
68 Non-LCD Station User’s Guide
Other Advanced Features GCA70-313
Impact SCS Volume Buttons
Impact Volume Buttons