Filter
Top Products
Volume Control
Setting Current Volume Level
The volume control on your telephone is a multipurpose control you can use to set
the volume (loudness) of the ringer, the speaker, the handset, the headset, back
-
ground music, and the group listening mode.
·
There are four ringer loudness levels
(plus an off position). Set these
levels as follows:
1. While your telephone is on-hook and idle,
PRESS the VOLUME UP OR VOLUME
DOWN button once for each change in
loudness you desire. The ringer sounds
once for each change as an example of the
current setting. (On the 8112N, the ringer
volume is controlled by a three position
switch on the bottom of the telephone.)
NOTE: If you set the ringer to the
OFF
position, your telephone will sound
a short ring burst once for each call you receive at your station while the
ringer is off.
·
There are eight speaker loudness levels. Set these levels
for the current call as follows:
1. While on a call and in station mode, PRESS the VOLUME UP OR
VOLUME DOWN button once for each change in loudness that you
desire.
·
There are at least eight handset loudness levels that you
can set for the current call as follows (not available on
8112N):
1. While on a call and in handset mode, PRESS the VOLUME UP OR
VOLUME DOWN button once for each change in loudness that you
desire.
66 Non-LCD Station User’s Guide
Other Advanced Features GCA70-313
Impact SCS Volume Buttons