Filter
Top Products
4. CHOOSE your speed dial route from the following list:
•
PRESS line button to select outside line.
•
DIAL 00 to select prime line or last line used.
•
DIAL 01 to 16 to select line group.
•
PRESS INTERCOM button or dial 8 to select intercom.
NOTE: You may need a pause between numbers to compensate for differ
-
ences in response time between your system and the host system (ask your
attendant about this). To store a pause, press HOLD, then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press TAP to store a hookflash, then continue dialing.
5. DIAL number (up to 16 digits long—include
* and # if
needed).
6. PRESS TRNS/CONF to store the number.
7. REPEAT previous steps until all numbers are stored.
8. PRESS SPEAKER to end.
You can record your station’s programmed DSS and speed dial numbers on page
56 for quick reference.
Non-LCD Station User’s Guide 55
GCA70-313 Programming