Nonverbal Messaging
LCD Message Delivery
You can set system-supplied messages at your station to be received and displayed
by a calling LCD station.
·
To turn on a message from your telephone,
1. PRESS INTERCOM AND DIAL *02.
2. DIAL the desired code number from your message list (01–30)
on the next page,
•
For a “Back At” message, dial the code for time numbers
and colon from dialing codes table.
(For example, DIAL
#00012904
05
for the time 01:45).
•
For a “Call” message, dial code for telephone number of
your new location.
(For example, DIAL
# 09 07 08 15
02 02 00 00
for the number 978–2200).
NOTE: See following page for LCD dialing codes.
3. DIAL
# AND PRESS SPEAKER to end message. Your
intercom light flashes to indicate the waiting message.
·
To turn off the message and your intercom light,
1. PRESS INTERCOM AND DIAL #02.
Non-LCD Station User’s Guide 47
GCA70-313 Nonverbal Messaging
5