Filter
Top Products
Programming
DSS Numbers
Storing another station at a DSS/BLF programmable location allows a user to
monitor that station, dial with the press of one button, or pick up or hold calls at that
station quickly and conveniently. You can record your station’s programmed DSS
and speed dial numbers on page 56 for quick reference.
·
To store an intercom number as a DSS number,
NOTE: Storing DSS numbers at button locations will overwrite any previ-
ously stored numbers.
1. PRESS INTERCOM.
2. DIAL
**3.
3. PRESS programmable button to choose DSS location.
4. DIAL extension number.
5. PRESS next location button AND STORE next DSS number.
6. REPEAT the previous step until all DSS numbers are stored.
CAUTION
Do not attempt to program interactive buttons; doing so can cause the sys
-
tem to make features unavailable. If you inadvertently reprogram interac
-
tive buttons, you can retrieve the button functions in the following manner:
1. PRESS INTERCOM AND DIAL
**1
2. PRESS the interactive button to be reprogrammed
3. DIAL
91, 92,or 93 (for buttons from left to right).
Non-LCD Station User’s Guide 53
GCA70-313 Programming
6