Vertical Communications 8412S Telephone User Manual


 
Sending And Receiving
Non-Verbal Messages
8.1 Message Waiting Light And Messaging
If the system installer designates your LCD speakerphone as a central
message desk or programs it to have message-wait originate ability, you
can turn on the message-waiting light of any other telephone. This light
lets that telephone user know that you have a message for him or her. In
addition to the message waiting light, leaving a message indication at a
station that is a prime intercom, also causes the dial tone at that station to
sound in a broken manner when the station user takes his or telephone
off-hook.
If a telephone that receives a message has a DSS button that is
programmed to call the station that left the message, the light next to that
DSS button on the message-receiving station will flash.
To turn on the message-waiting light (and a broken dial tone) at
another station that is idle or busy,
1.
Press INTERCOM.
2.
Dial S 3.
3. Dial extension number of station to be alerted. The
message-waiting light of called station will flash.
You can also turn on the message-waiting light and broken dial tone
at another station when that station is busy,
1. Hear the busy tone and remain on the line.
2.
Press MESSAGE.
3. Hang up.
Large Screen Speakerphone Manual 8 – 1
GCA70–349 Sending And Receiving Non-Verbal Messages
8