Filter
Top Products
23
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
22
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Digital phones
If you have a digital (PBX) telephone service, you need to run an analog extension from the
PBX (recommended for best performance) or use a digital-to-analog telephone line
converter. For more information, contact ClearOne Technical Support.
Note: If you connect the RAV through a digital-to-analog line converter, you will not be able
to use the tabletop controller or the RAV-Ware dialing interface to make calls.You will instead
need to dial from the digital phone. The phone handset must be kept off hook for the
duration of the call.
To connect to a digital phone
1. Connect one end of the telephone cable into the telephone line on the back of the mixer and
the other end into the digital-to-analog converter.
2. Connect the converter's power adapter into an electrical outlet.
3. Connect a second telephone cable from the converter to a PBX phone. Consult the
converter user manual for more information.
Digital-to-Analog
Converter
AC Adapter
Phone Jack
Digital, PBX,
or Multi-line phone
RAV mixer
Handset
Electrical
Outlet
Telco Line
Control
Camera
Lan
Mic Pod
Record/Aux
Left In
Right In
Left Out
Right Out
Left +
Left -
Right +
Right -
Power
12V DC 1A
Figure 2.18. Connecting the RAV mixer to digital-to-analog converter
Connecting the RAV — Auxiliary Devices