Cisco Systems CP9951CCAMK9 Conference Phone User Manual


 
94 OL-19963-01
The Cisco Unified CM User Options main web page displays. From this page you can select User
Options to select a device, access User Settings, Directory features, your Personal Address Book,
and Fast Dials.
7. To sign out of user options, select Logout.
Device
You can make changes to your device settings on your phone from the User Options web pages. You
can make changes to these device settings on your phone:
Lines
Speed-dial settings
Phone services
Related Topics
Speed Dial, page 89
Select a Device From the User Options Web Pages
1. After you have signed in to your User Options web pages, select User Options > Device.
The Device Configuration page displays. Toolbar buttons located at the top of the Device
Configuration page are specific to the selected device type.
2. If you have multiple devices assigned to you, select the appropriate device (phone model,
Extension Mobility profile, or Remote Destination profile) from the Name drop-down menu.
Customize Do Not Disturb Options
1. Sign in to your User Options web pages. Your system administrator sets up the Do Not Disturb
(DND) feature for your phone.
2. From the drop-down menu, select User Options > Device.
3. Set the following options:
Do Not Disturb—Check the check box to enable or disable DND.
DND Option—Select None, Ringer Off (to turn off only the ringer), Call Reject, or Use
Common Phone Profile Setting.
DND Incoming Call Alert (applies to either DND option set)—Set the alert to Beep Only,
Flash Only, Disable, or select “None” (to use the “Alert” setting set up by your system
administrator).