2 OL-22332-01
Dial from a call log (while
not on another call)
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Hig
hlight a call record.
Note
If the Details softkey appears, the call is the primary entry of a
multiparty call. See the Tips section below.
3. If you need to edit the displayed number, press EditDial followed by
<< or >>. To delete the number, press EditDial followed by Delete.
You may need to press the more softkey to display Delete.
4. Go
off-hook to place the call.
Dial from a call log (while
connected to another call
)
1. Choose > Missed Calls, Placed Calls, or Received Calls.
2. Hig
hlight a call record.
Note If the Details softkey appears, the call is the primary entry
of a multiparty call. See the Tips section below.
3. If you
need to edit the displayed number, press EditDial followed by
<< or >>.
4. T
o delete the number, press EditDial followed by Delete. You may
need to press the more softkey to display Delete.
5. Press Dia
l.
6. C
hoose a menu item to handle the original call:
–
Hold—Puts the first call on hold and dials the second.
–
Transfer—Transfers the first party to the second and drops you
from the call. Press Transfer again after dialing to complete the
action.
–
Conference—Creates a conference call with all parties,
including you. Press Confrn or Conference again after dialing to
complete the action.
–
EndCall—Disconnects the first call and dials the second.
See if the line in the call
log
is busy before placing
a call to that line
Look for Busy Lamp Field indicators. See Using BLF to Determine a Line
State, page 8.
If you want to... Then...