Filter
Top Products
Advanced Call Handling
Cisco Unified IP Phone User Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 13
The Cisco Extension Mobility ChangePIN feature allows you to change your PIN from your Cisco
Unified IP Phone.
Tips
• EM automatically logs you out after a certain amount of time. Your system administrator
establishes this time limit.
• Cha
nges that you make to your EM profile from your Cisco Unified CM User Options web pages
take effect immediately if you are logged in to EM on the phone; otherwise, changes take effect
the next time you log in.
• Cha
nges that you make to the phone from your User Options web pages take effect immediately
if you are logged out of EM; otherwise, changes take effect after you log out.
• Local
settings controlled by the phone are not maintained in your EM profile.
If you want to... Then...
Log in to EM 1. Choose > EM Service (name can vary).
2. E
nter your user ID and PIN (provided by your system administrator).
3. If prompted, select a
device profile.
Log out of EM 1. Choose >
EM Service (name can vary).
2. W
hen prompted to log out, press Yes.
Change your PIN using
the Chang
e Credentials
service
1. Choose > Change Credentials.
2. Enter y
our User ID in the User ID field.
3. Enter your PI
N in the Current PIN field.
4. Enter y
our new PIN in the New PIN field.
5. Enter y
our new PIN again in the Confirm PIN field.
6. Press Ch
ange.
You will see a PIN Change Successful message.
7. Press Exit.
Change your PIN using
the ChangePIN
softkey
1. Choose > EM Service (name can vary).
2. Press Ch
angePIN.
3. Enter your PI
N in the Current PIN field.
4. Enter y
our new PIN in the New PIN field.
5. Enter y
our new PIN again in the Confirm PIN field.
6. Press Ch
ange.
You see the PIN Change Successful message.
7. Press Exit.