Filter
Top Products
Changing Phone Settings
Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0 55
Changing Phone Settings
You can personalize your Cisco Unified IP Phone by adjusting the ring tone, volume, and other
settings.
Customizing Rings and Message Indicators
You can customize how your phone indicates an incoming call and a new voice mail message. You can
also adjust the ringer volume for your phone.
If you want to... Then...
Change the ring tone per
line
1. Choose ( ) > Settings > User Preferences > Rings.
2. Choose a phone line or the default ring setting.
3. Choose a ring tone to play a sample of it.
4. Press Select and Save to set the ring tone, or press Cancel.
Adjust the volume level for
the phone ringer
Press the Volume button while the handset is in the cradle and the
headset and speakerphone buttons are off. The new ringer volume is
saved automatically.
Change the way that the
voice message light on your
handset works
1. Log in to your Cisco Unified CM User Options web pages. (See
Accessing Your User Options Web Pages, page 64.)
2. Access your message indicator settings. (See Controlling Line
Settings on the Web, page 71.)
Note Typically, the default system policy is to indicate a new voice
message by displaying a steady light on the handset light strip.
Change the way the audible
voice message indicator
sounds on your phone
1. Log in to your User Options web pages. (See Accessing Your User
Options Web Pages, page 64.)
2. Access your message indicator settings. (See Controlling Line
Settings on the Web, page 71.)