Filter
Top Products
Basic Call Handling
Cisco Unified IP Phone 7931G for Cisco Unified Communications Manager 6.0 35
• Your phone may reject your attempt to set up Call Forward All directly on the phone if the target
number that you enter would create a call forwarding loop or would exceed the maximum number
of links permitted in a call forwarding chain.
Using Do Not Disturb
You can use the Do Not Disturb (DND) feature to turn off only the ringer on your phone or to turn
off all audible and visual notifications of incoming calls. Your system administrator enables DND for
your phone.
When DND and Call Forward are both enabled on your phone, calls are forwarded and the caller does
not hear a busy tone.
DND interaction with other types of calls includes:
• DND does not affect intercom calls or non-intercom priority calls.
• If both DND and auto-answer are enabled, only intercom calls will be auto-answered.
If you want to... Then...
Turn on DND Press DND.
“Do Not Disturb” displays on the phone, the DND lights
(solid), and the ring tone is turned off.
Turn off DND Press DND.
Customize DND settings 1. Log in to your User Options web pages. See Accessing Your
User Options Web Pages, page 64.
2. Choose User Options > Device.
3. Set the following options:
• Do Not Disturb—Set to enable/disable DND.
• DND Option—Choose either Call Reject (to turn
off all audible and visual notifications) or Ringer
Off (to turn off only the ringer).
• DND Incoming Call Alert (applies to either DND
option set)—Set the alert to beep only, flash only,
disable the alert, or choose “None” (to use the
“Alert” setting configured by your system
administrator).