Filter
Top Products
43-34
Cisco Unified CallManager System Guide
OL-14153-01
Chapter 43 Cisco Unified IP Phones
Where to Find More Information
Where to Find More Information
Related Topics
• Understanding Directory Numbers, page 18-1
• Voice Mail Connectivity to Cisco Unified CallManager, page 29-1
• Enabling Autoregistration, Cisco Unified CallManager Administration Guide
Step 8
Add and configure lines (DNs) on the phone. You can also
configure phone features such as call park, call forward, and call
pickup.
Configuring a Directory Number, Cisco
Unified CallManager Administration Guide
Step 9
Configure speed-dial buttons.
You can configure speed-dial buttons for phones if you want to
provide speed-dial buttons for users or if you are configuring
phones that do not have a specific user who is assigned to them.
Users can change the speed-dial settings on their phones by using
Cisco Unified CallManager User Options.
Configuring Speed-Dial Buttons, Cisco
Unified CallManager Administration Guide
Step 10
Configure Cisco Unified IP Phone services.
You can configure services for Cisco Unified IP Phone models
7970/71, 7960/61, 7940/41, 7912, 7911, and 7905 and Cisco IP
Communicator if you want to provide services for users or if you
are configuring phones that do not have a specific user who is
assigned to them. Users can change the services on their phones
by using the Cisco Unified CallManager User Options window.
Configuring Cisco Unified IP Phones, Cisco
Unified CallManager Administration Guide
Step 11
Customize phone button templates and softkey templates, if
required. Configure templates for each phone.
Configuring Phone Button Templates, Cisco
Unified CallManager Administration Guide
Configuring Cisco Unified IP Phones, Cisco
Unified CallManager Administration Guide
Adding Nonstandard Softkey Templates,
Cisco Unified CallManager Administration
Guide
Step 12
Configure the Busy Lamp Field feature, if required. You must use
customized phone button templates to configure BLF/SpeedDial
buttons.
BLF/SpeedDial Configuration Settings, Cisco
Unified CallManager Administration Guide
Step 13
Assign services to phone buttons, if required. Adding a Cisco Unified IP Phone Service to a
Phone Button, Cisco Unified CallManager
Administration Guide
Step 14
Provide power, install, verify network connectivity, and configure
network settings for the Cisco Unified IP Phone.
Cisco Unified IP Phone Administration Guide
for Cisco Unified CallManager
Step 15
Associate user with the phone (if required). Associating Devices to an End User, Cisco
Unified CallManager Administration Guide
Step 16
Make calls with the Cisco SIP IP Phone. Refer to the user guide for your Cisco SIP IP
Phone.
Table 43-6 Phone Configuration Checklist for SIP Protocol (continued)
Configuration Steps Procedures and Related Topics