Filter
Top Products
Chapter 12
80
Setup to receive delayed
polling 12
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Press (Fax).
b Press a or b to choose Polling RX.
Press OK.
c Press a or b to choose Timer.
Press OK.
d Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
e Enter the fax number you are polling.
f Press Mono Start or Colour Start.
The machine makes the polling call at
the time you entered.
Sequential polling 12
Sequential polling lets you request
documents from several fax machines in one
operation.
a Press (Fax).
b Press a or b to choose Polling RX.
Press OK.
c Press a or b to choose Standard,
Secure or Timer.
Press OK.
d Do one of the following:
If you chose Standard, go to
step e.
If you chose Secure, enter a four-
digit number, press OK, go to
step e.
If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to step e.
e Press a or b to choose
Broadcasting.
Press OK.
f Press a or b to choose Add Number.
Press OK.
g Enter a number using Speed-Dial, a
Group, or dial pad.
Press OK.
h Repeat steps f and g for all the fax
numbers you want to poll, and then
press a or b to choose Complete.
Press OK.
i Press Mono Start or Colour Start.
The machine polls each number or
group in turn for a document.
Press Stop/Exit while the machine is dialling
to cancel the polling process.
To cancel all sequential polling receive jobs,
see Checking and cancelling waiting
jobs on page 37.