Filter
Top Products
Chapter 9
64
f Press a or b to choose Playing OGM.
Press OK.
Adjust the volume by pressing Volume
d or c .
g Press Stop/Exit.
Erasing your OGM 9
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose Setup TAD.
Press OK.
d Press a or b to choose OGM.
Press OK.
e Press a or b to choose TAD Message
or F/T Message.
Press OK.
f Press a or b to choose Erase MSG.
Press OK.
g Choose one of the following:
Press 1 to erase the OGM.
Press 2 to exit without erasing.
h Press Stop/Exit.
Fax/Tel OGM 9
If your machine is set to Fax/Tel receive
mode this message will be played by your
Brother machine to a caller. Unlike the TAD
OGM, the caller will not be able to leave a
message. The purpose of the fax/tel OGM is
to let the caller know that their call will be
answered shortly.
To record your Fax/Tel OGM follow the
instructions on Outgoing message
(OGM) on page 63.
If you need to review the steps for setting up
the Fax/Tel receive mode, see Receive
modes on page 40.
Activating TAD mode 9
When the light glows, TAD mode is
active. Press and hold until it lights to
enter TAD mode.
Managing your
messages
9
Message indicator 9
The light flashes if you have any new
messages waiting for you.
The LCD displays the total number of voice
and fax messages stored in the TAD
memory.
Fax messages are only stored when Fax
Storage or Fax Preview is turned on. See
Advanced fax operations (Monochrome
only) on page 67.
Playing voice messages 9
All messages are played in the order they
were recorded. The LCD shows the number
of the current message, the total number of
messages, and the time and date the
message was recorded.
Follow the steps below to listen to your voice
messages:
a Press Play/Record.
The following commands are available
when playing messages:
l
(RWD)
Repeats a message.
#
(FWD)
Skips to the next message.
or
Adjusts the volume.
b Press Stop/Exit