Brother MFC-660CN Cordless Telephone User Manual


 
Chapter 6
42
TAD (MFC-660CN only) 6
TAD helps you automatically manage
incoming calls, by recognising whether they
are fax or voice calls and dealing with them in
one of the following ways:
Faxes will be automatically received.
Voice callers can record a message.
To set up the TAD mode see page 63.
External TAD (MFC-440CN
only) 6
External TAD mode lets an external
answering device manage your incoming
calls. Incoming calls will be dealt with in one
of the following ways:
Faxes will be automatically received.
Voice callers can record a message on the
external TAD.
For more information see Connecting an
external TAD (telephone answering
device) on page 50.
Receive mode settings 6
Ring Delay 6
The Ring Delay sets the number of times the
machine rings before it answers in Fax Only
or Fax/Tel mode. If you have external or
extension phones on the same line as the
machine choose the maximum number of
rings.
(See Operation from extension
telephones on page 52 and Fax
Detect on page 43.)
If toll saver is on, then the ring delay setting
has no effect. See Setting toll
saver on page 66. (MFC-660CN only)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose Ring Delay.
Press OK.
e Press a or b to choose Ring Delay.
Press OK.
f Press a or b to choose how many
times the line rings before the machine
answers (0-8 UK only) (1-4 Ireland
only).
Press OK.
If you choose 0, the line will not ring at
all.
g Press Stop/Exit.
If TAD Mode is On, it will override
your receive mode setting. The
screen shows TAD.
If TAD Mode is Off, the receive
mode returns to your original
setting. (See TAD-Mode for internal
TAD on page 63.)