Brother MFC-660CN Cordless Telephone User Manual


 
Chapter 4
28
Turning the TX Lock on/off
Turning TX Lock on 4
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose TX Lock.
Press OK.
e Press a or b to choose Set TX Lock.
Press OK.
f Enter the registered 4-digit password.
Press OK.
The machine goes offline and the LCD
shows TX Lock Mode.
Turning TX Lock off 4
a Press Menu.
b Enter the registered 4-digit password.
Press OK.
TX lock is automatically turned off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in TX Lock
mode until the registered password is
entered.
Memory Security
(MFC-660CN only) 4
Memory Security lets you prevent
unauthorized access to the machine. You will
not be able to continue to schedule Delayed
Faxes or Polling jobs. However, any pre-
scheduled Delayed Faxes will be sent even if
you turn on Memory Security, so they will not
be lost.
While Memory Security is on, the following
operations are available:
Receiving faxes into memory (limited by
memory capacity)
Fax forwarding (If Fax Forwarding was
already On)
Remote retrieval (If Fax Storage was
already On)
While Memory Security is on, the following
operations are NOT available:
Printing received faxes
Sending faxes
Copying
PC printing
Scanning
PhotoCapture
PC Fax Receive
Note
To print the faxes in memory, turn off
Memory Security.
You must turn off PC Fax Receive before
you can turn on Memory Security. (See
Turning off Advanced Fax
Operations on page 71.)