Filter
Top Products
BaracodaManager for PC – User Guide v3.39 - 60 -
Data Capture
for Workforce
in Motion
The table below shows the actions you can take with the buttons:
Button
Functionality
Cancel
Close window with no changes.
Save
Store and send the new parameters to the barcode reader.
Default Settings
Restore the factory settings. The barcode reader (flash) memory is erased and
the factory default parameters are restored. Check the device manual for
details.
14.1. Product settings
To find out more about the product settings, please refer to the barcode reader User Manual.
14.2. Bluetooth settings
To find out more about the Bluetooth settings, please refer to the barcode reader User Manual.
Check the box
to activate
Baracoda
Header
Check the box
to activate
prefix/suffix
Display the entire
data format sent to
the host device
Check the box to
Activate no data loss
mode
(acknowledgement)
When Prefix/Suffix
box is checked,
select Data format
(ASCII or Hex)
and type values in
active fields.
Configure the number
of barcodes (1 or
MAX) that are
buffered by the
reader (real time
mode, reading
barcodes while
disconnected)
Select max BT
power allowed by
law in your country.
Check the box to
activate PIN code
authentication
Select the duration
of Sniff period
Reader’s PIN code,
used when Security
is enabled