Filter
Top Products
BaracodaManager for PC – User Guide v3.39 - 47 -
Data Capture
for Workforce
in Motion
The following table shows the Shutdown Timer fields that you can set:
Field
Functionality
When connected
Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is connected and without any activity.
When not connected
Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is not connected and without any activity.
The following table shows the Battery field:
Field
Functionality
Battery
Battery level (0-100%) and its current charging status.
The following table shows the Other Settings buttons that you can set:
Button
Functionality
Product
Access product settings (see below)
Bluetooth
Access Bluetooth connection settings (see below)
Symbology
Access types of barcodes settings (see below)
RFID options
Access RFID settings
Signature/image
configuration
Access the signature mode and picture mode configuration (only for 2D
readers with firmware version >= 1.47, see below)
The table below shows the actions you can take with the Data capture mode radio buttons:
Button
Functionality
Both
Activates both the barcode scan engine and the RFID engine.
RFID
Activates the RFID engine and turns off the barcode scan engine.
Barcode
Activates the barcode scan engine and turns off the RFID engine.
The table below shows the actions you can take with the buttons:
Button
Functionality
Cancel
Close window with no changes.
Save
Store and send the new parameters to the barcode reader.
Default Settings
Restore the factory settings. The barcode reader (flash) memory is erased and
the factory default parameters are restored. Check the device manual for
details.
Upgrade
Ugrade the reader’s firmware. Please check Chapter 16 for details.