Filter
Top Products
Page 6 - Overview of the 5410 The 5410 Telephone
Page 6 - The 5410 Telephone IP Office 5410 User’s Guide
Overview of the 5410 40DHB0002UKEY – Issue 1 (7th February 2005)
The 5410 Telephone
Overview of the 5410
This guide covers the use of the Avaya 5410 telephone, running in Key and Lamp
mode, on Avaya IP Office telephone systems operating with Level 3.0 software and the
5410 telephone’s software running at REL:2.00 or higher (see Using Self Test on page
21) The diagram below shows the main 5410 telephone features.
1. Display, Call Appearance and Function keys: Call Appearance Keys allow the
user to handle multiple calls and the display shows call information. System
functions (allocated by your System Administrator) can also be displayed. See Call
Appearance Keys on page 7 and Function Keys on page 23.
2. Message lamp - Lit when the user has voicemail messages. Can also be set to
flash when the phone is ringing.
3.
Previous/Next Page - Move through the different pages of the call
handling, speed dials and call log screens. Also used to move the cursor during
data entry.
4.
Messages: Access the user's mailbox.
5. Call Handling Buttons: See Basic Call Handling Features on page 9.
• Hold: Place call on hold.
• Transfer: Transfer call.
• Conference: Conference held calls.
• Drop: Drop call.
• Redial: Redial last number dialed.
6. Dial pad: Standard 12-button pad for dialing telephone numbers.
7.
Volume Controls: Adjust the speaker, handset, headset, or ringer
volume depending on which is currently in use.
8. Handset and Headset Sockets: The sockets for both the headset and handset
cables can be found on the side of the telephone.
9.
Mute: Turns the microphone on/off. When in use, the associated light is on
and the caller cannot hear you.