Filter
Top Products
Page 42 - Function Key Programming Function Keys
Page 42 - Function Keys IP Office 5410 User’s Guide
Function Key Programming 40DHB0002UKEY – Issue 1 (7th February 2005)
Hold - Hold Call
Place the current call on hold at the central office. This function is not supported in the
USA.
If no exchange slot number is specified when the function is programmed, central office
slot 0 is used.
Pressing
Hold is only supported if the central office provides a Q.931 hold facility. It
is not the same as local hold provided by the IP Office.
[User | Digital Telephony | Advanced | Hold | Hold Call]
See also:
• Rtriv - Retrieve Call on page 52.
HoldCW - Hold Call Waiting
Place the current call on hold and connects any call waiting. This function is not
supported in the USA.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing
HoldCW places the current call on hold and connects any call waiting
without any ringing.
[User | Digital Telephony | Advanced | Hold | Hold CW]
IAuto - Automatic Intercom
Connects call to the extension without ringing.
This function requires entry of an extension number when programmed. The target
extension must be support handsfree operation. This function cannot be programmed
through the phone by the user.
Press
IAuto connects the call without any ringing at the remote extension. If the
target extension is busy or not available, the call will follow any forwarding or diversion
to voicemail set.
[User | Digital Telephony | Emulation | Automatic Intercom]
ICSeq - Set Inside Call Sequence
Sets the ringing pattern (sequence) used for internal calls.
This function is currently not supported on the 5410 telephone.
IDial - Dial Intercom
The same as IAuto - Automatic Intercom on page 43. This function cannot be
programmed through the phone by the user.
[User | Digital Telephony | Emulation | Dial Intercom]
Inclu - Dial Inclusion
Intrudes on a call in progress at the target extension.
This function is currently not supported on the 5410 telephone.