Filter
Top Products
Function Key Programming Function Keys - Page 39
IP Office 5410 User’s Guide Function Keys - Page 39
40DHB0002UKEY – Issue 1 (7th February 2005) Function Key Programming
FwNOf - Forward On No Answer Off
Switches the extension to forward on no answer off.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing
FwNOf switches the extension's use of forward on no answer off.
Can also be used in conjunction with FwNOn - Forward On No Answer On on page 39.
[User | Digital Telephony | Advanced | Forward | Forward On No Answer Off]
FwUOn - Forward Unconditional On
Switches the extension to forward all its calls except hunt group calls.
Note: When Call Appearance keys have been allocated, all the call appearance lines
must be in use before this function becomes active.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing
FwUOn toggles the extension's forward on busy state. When on, FwUOn
is shown with a
symbol and the display includes a D. When on, calls are forwarded to
the extension's forward number (see FwBNo - Forward On Busy Number on page 38).
[User | Digital Telephony | Advanced | Forward | Forward Unconditional On]
FwUOf - Forward Unconditional Off
Switches the extension’s forward unconditional off.
This function does not required any data to be entered when programmed. This
function cannot be programmed through the phone by the user.
Pressing
FwUOf switches the extension's use of forward unconditional off. Can
also be used in conjunction with FwUOn - Forward Unconditional On on page 40.
[User | Digital Telephony | Advanced | Forward | Forward Unconditional Off]
GrpPg - Group Paging (!)
This function can be programmed with or without a target extension or group number.
This function can be programmed through the phone by the user using an
Admin
key.
If programmed with a target number, the
GrpPg key displays that number. When
GrpPg is pressed, it will make a paging call to that number.
If programmed without a target number, the number must be dialed after the user
presses
GrpPg.
[User | Digital Telephony | Emulation | Group Paging]
HdSet - Headset Toggle (!)
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
The programmed key will then switch the phone between handset and headset
operation. When on, HdSet is shown on a dark background.
There is no linkage between a programmed HdSet key and the phone's
HEADSET key.
[User | Digital Telephony | Advanced | Miscellaneous | Headset Toggle]