Filter
Top Products
Overview of 5410 Options Changing the 5410 Options - Page 19
IP Office 5410 User’s Guide Changing the 5410 Options - Page 19
40DHB0002UKEY – Issue 1 (7th February 2005) Overview of 5410 Options
Changing the 5410 Options
Overview of 5410 Options
The options menus are accessed by pressing Option. These menus allow you to
adjust a number of 5410 features.
To select an option:
1. Press the
or next to it
2. The
key actions change according to the current available actions.
3. To exit and return to the normal call handling screen press
Exit.
4. Whilst in the options menus, you can still make and receive calls using the
telephone keypad controls.
The options are:
• Ring Options:
Sets the:
• The ringing used by your 5410.
• Toggles the message lamp on/off to show when you have an incoming call.
• Toggles the ‘Show Phone Screen’ option on or off.
See Ring Options on page 20.
• Contrast:
Adjust the display contrast.
See Adjusting the Display Contrast on page 20.
• Log Setup:
Configure which calls appear in the call log.
See Setting Which Calls are Logged on page 18.
• Miscellaneous:
Enables you to select to remain in your Speed Dial Menu during call handling.
• Self Test:
Test the phone.
See Using Self Test on page 21.
• Language:
Select the phone's display language. See Language on page 22.
Press
to display:
• Handset AGC/Headset AGC:
Switch handset/headset automatic gain control on/off.
See Automatic Gain Control (AGC) on page 22.
Press
again to display:
• Erase:
Reset the telephone to its default settings. See Default Phone/Erase All Settings
on page 21.