Filter
Top Products
Page 40 - Function Key Programming Function Keys
Page 40 - Function Keys IP Office 5410 User’s Guide
Function Key Programming 40DHB0002UKEY – Issue 1 (7th February 2005)
Here- - Follow Me Here Cancel
If another extension has follow me set to this extension, switches off the follow me
action.
This function requires the original target extension to be entered when programmed.
The extension number is then shown next to Here-. This function cannot be
programmed through the phone by the user.
Pressing
Here- cancels the use of follow me at the target extension.
[User | Digital Telephony | Advanced | Follow Me | Follow Me Here Cancel]
Here+ - Follow Me Here
Forwards calls to the target extension to this extension.
This function requires the original target extension to be entered when programmed.
The extension number is then shown next to Here+. This function cannot be
programmed through the phone by the user.
Pressing
Here+ sets the target extension's Follow Me To number to that this
extension. Calls to the target extension are then forwarded to this extension.
[User | Digital Telephony | Advanced | Follow Me | Follow Me Here]
HfAns - Internal Auto-Answer (!)
Answers internal calls after a single ring.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
The
HfAns key toggles internal auto-answer on/off. When on, HfAns is shown with
a
symbol.
[User | Digital Telephony | Emulation | Internal Auto Answer]
See also:
• RngOf - Ringer Off (!) on page 52.
• CWOn - Call Waiting On on page 34.
HGEna - Hunt Group Enable
Sets the extension's membership of a group or groups as enabled. This function does
not take the Hunt Group In/Out of Service.
This function can be programmed with or without a target group number. This function
cannot be programmed through the phone by the user.
If programmed without a group number, pressing
HGEna toggles all the extension's
group memberships to either enabled or disabled. A
is shown next to HGEna
when the group memberships are enabled.
If programmed with a group number, that number is shown next to
HGEna.
Pressing
HGEna will enable the extension's membership of that group. In this
mode the key does not toggle.
When enabled, G is shown on the display and the extension will receive group calls.
[User | Digital Telephony | Advanced | Hunt Group | Hunt Group Enable]
See also:
• HGNS+ - Set Hunt Group Night Service (!) on page 42.
•
HGOS+ - Set Hunt Group Out of Service42 on page.
• HGDis - Hunt Group Disable on page 42.