Page 52 - Function Key Programming Function Keys
Page 52 - Function Keys IP Office 5410 User’s Guide
Function Key Programming 40DHB0002UKEY – Issue 1 (7th February 2005)
Suspe - Suspend Call
Suspend the current call at the exchange.
If no exchange slot number is specified when the function is programmed, exchange
slot 0 is used. This function cannot be programmed through the phone by the user.
Pressing
Suspe is only supported if the exchange provides a Q.931 suspend call
facility.
[User | Digital Telephony | Advanced | Suspend | Suspend Call]
See also:
• Resum - Resume Call on page 51.
Timer - Timer (!)
Starts a timer on the phone's display.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
The timer is reset for each new call made or answered. When timer mode is selected, a
is shown next to Timer.
[User | Digital Telephony | Emulation | Timer]
TmDay - Time of Day (!)
Replaces the user name and number details on the phone display with the date and
time.
This function does not require any data entered when programmed. This function can
be programmed through the phone by the user using an
Admin key.
When time and date mode is selected, a
is shown next to TMDay.
[User | Digital Telephony | Emulation | Time of Day]
Toggl - Toggle Calls
Cycle through each of the extension user's current held calls.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
Pressing
Toggl puts the user's current call on hold and connects a previously held
call.
[User | Digital Telephony | Advanced | Call | Toggle Calls]
VMRB- - Voicemail Ringback Off
Switches voicemail ringback for the extension off.
This function does not require any data entered when programmed. This function
cannot be programmed through the phone by the user.
The VMRB- key switches voicemail ringback for the extension off.
[User | Digital Telephony | Advanced | Voicemail | Voicemail Ringback Off]