Filter
Top Products
1400 Series Phone User Guide Page 31
15-601040 Issue 06d (Monday, March 19, 2012)IP Office
Making Calls:
2.1 En-Bloc Dialing
By default, when you start dialing a number on your phone, the phone immediately connects to the telephone system
and starts passing the digits you dial to the phone system. You cannot correct the digits you have already dialed except
by ending the call and starting again. Also if you pause dialing for too long the phone system may think that you have
finished dialing and will attempt to connect the call using only the digits you have completed dialing so far.
En-bloc dialing allows you to compose and edit the number to dial on your phone's display before it is sent to the phone
system to be dialed.
Through the phone's menus you can select whether you want to use traditional or en-bloc dialing when making calls. Your
chosen setting is then applied whenever you are using a phone that supports en-bloc dialing.
Dialing a Number Using En-Bloc Mode
1.With no connected call on the phone, start dialing. Do not lift the handset or select headset or speaker before
dialing.
2.You can use the right arrow key to delete the previous digit dialed if you need to correct the number.
3.When you have completed the number as required, you can select how you want to make the call.
· Lift the handset to start a call using the handset.
· Pressing the Call soft key or OK button to start the call using the phone's default handsfree audio path
(speaker or headset). You can also press one of your idle call appearance to make the call using that
appearance.
· Press the Headset button to start the call on a headset connected to your phone.
· Press the Speaker button to start the call on your phone's handsfree speaker.
Enabling/Disabling En-Bloc Dialing
You can enable or disable your en-bloc dialing setting through the phone's Features menu.
1.Press the Features soft key if shown.
· To access the menu during a call, press the right arrow key or press the PHONE key and then press
the Features soft key.
2.Use the up and down arrow keys to scroll the display to the option Call Settings.
3.Press the Select soft key or the OK button or the right arrow key.
4.Use the up and down arrow keys to scroll the display to the option En-Bloc Dial.
5.Use the left and right arrow keys to change the setting or use the indicated soft key.
142