Filter
Top Products
1. Select Transfer conference ....
2. Press the OK button.
The multiple conference continues without a controller, but at the original controller’s
responsibility.
When you are in the state Hold/Retrieve locked/disabled, you can alternatively replace the
handset.
Ending the multiple conference call as controller
To end a multiple conference call as controller, replace the handset or press the Drop button.
Referring back as passive participant on a multiple
conference call
Use this procedure to make a consultation call while on a multiple conference call as passive
participant.
1. Select new call to ....
2. Press the OK button.
The controller is made aware of this in the List of all confer. users.
3. Enter the call number of the new conference participant.
4. Once you are connected to this person, you can replace the handset to transfer the
conference connection.
The controller is made aware of this in the List of all confer. users.
5. To return to the multiple conference, if the called person does not answer, press the
Drop button.
Multiple conference *
34 1408/1416 User Guide January 2010