Filter
Top Products
Configuring Local Menu options
96
• Changes have occurred regarding the provisioning of Bluetooth on
the IP Deskphone 1150E. With UNIStim 3.1, the Bluetooth Setup
page no longer provides the option to select Bluetooth headset as this
choice is moved to the Headsets menu.
• Users of USB Audio, when connected to a BCM system, may
experience constant beeping from the wireless headsets, if the user
inadvertently hits a call control keys in error.
• For the Avaya USB Adapters, the firmware of this device must be
V2.0.32 or later.
• For the Algo 4900 USB ATA, the firmware of this device must be
v1.00.32 or later.
• The Algo 4900 USB ATA is classified as a high power USB device
and must be connected to the phone through a powered USB hub.
• The Plantronics CS50-USB and CS60-USB must be AC-powered
before connecting them to the phone.
• For the Plantronics CS50-USB and CS60-USB, ensure that the
headset base is in ready mode (that is, the green LED on the right
hand side of the headset cradle is solid) before using the headset.
• For the Plantronics CS50-USB and CS60-USB to go off hook, press
the On Hook/Off Hook button for 3 seconds.
• At the time of this writing, GN Netcom produces four models of the
Jabra GN9300 series headsets: Jabra GN9330, Jabra GN 9330E,
Jabra GN 9350, and Jabra GN9350E. The USB Audio feature in the
IP Deskphones only supports the Jabra GN9330E and Jabra
GN9350E connected via USB.
• For the GN Netcom 9300 series, occasionally a single ring is lost
between the phone and the headset but is recovered at the next ring.
• For the GN Netcom 9300 series, occasionally a drop in audio quality
may be experienced when a 3-way conference is established.
Avaya Mobile Headset Adapter properties
You can use the Avaya Mobile Headset Adapter to answer calls
whenever the Avaya 1150E IP Deskphone is running.
To access the Avaya Mobile Headset Adapter (MHA) properties, press
the Services key twice to open the Local Tools menu, press the 1 key on