AT&T Not Availab IP Phone User Manual

Only the most careful attention has been devoted to quality standards in
the manufacture of your new voice terminal. Safety is a major factor in
the design of every set. But, safety is YOUR responsibility too.
Please carefully read the helpful tips listed below and on the next page.
These suggestions will enable you to take the fullest advantage of your
new voice terminal. Retain these tips for later use.
When using your voice terminal, the following safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury to
Read and understand all instructions.
Follow all warnings and instructions marked on the voice terminal.
This voice terminal can be hazardous if immersed in water. If you
accidentally drop the voice terminal into water, do not retrieve it until
you have first unplugged the line cord from the modular wall jack. Do
not reconnect the voice terminal until it has dried thoroughly.
Avoid using the voice terminal during electrical storms in your
immediate area. There is a remote risk of electric shock from
lightning. Urgent calls should be brief. Even though protective
measures may have been installed to limit electrical surges from
entering your business, absolute protection from lightning is
If you suspect a natural gas leak, report it immediately, but use a
telephone away from the area in question. The telephone’s electrical
contacts could generate a tiny spark. While unlikely, it is possible
that this spark could ignite heavy concentrations of gas.
Never push objects of any kind into the voice terminal through
housing slots since they may touch hazardous voltage points or short
out parts that could result in a risk of electric shock. Never spill liquid
of any kind on the voice terminal. If liquid is spilled, however, refer
servicing to proper service personnel.
To reduce the risk of electric shock, do not disassemble this voice
terminal. There are no user-serviceable parts inside. Opening or
removing covers may expose you to hazardous voltages. Incorrect
reassembly can cause electric shock when the voice terminal is
subsequently used. If your voice terminal does not work properly,
contact a qualified AT&T service technician.