Filter
Top Products
Feature Procedures
The following features can be used immediately. The procedures in this
section give short, step-by-step instructions for using each of these
features. For your convenience, beginning with the Conference feature,
the features are listed alphabetically.
GOING OFF-HOOK
When the headset or handset is plugged into the terminal, it is
immediately off-hook.
RAISING OR LOWERING RECEIVE VOLUME
You can use the Volume control button to raise and lower the receive
level volume under the following conditions:
The CALLMASTER voice terminal is off-hook, and the headset(s) is
plugged in.
The voice terminal is
not
off-hook on an external speakerphone call.
No call is ringing.
You are
not
in the midst of selecting a personalized ringing pattern.
To raise or lower the receive volume
To raise the volume of the receive level of the headset or the
handset, press the right half of the volume control button
labeled
;
To lower the receive level of the headset or the handset, press the
left half of the volume control button labeled
.
NOTE: There are eight possible volume settings. Each press of the
volume control button raises or lowers the volume one incremental level.
As you raise or lower the headset volume level, the display reflects your
choice, such as:
Headset L > > > > H
On the display, one arrow is the lowest setting, and eight arrows is the
highest setting.
NOTE: For procedures to raise and lower the ringer volume on your
CALLMASTER set, see the procedures for the Select Ring feature later
in this section.
17