Filter
Top Products
Installation
Use the following procedures to install your CALLMASTER voice
terminal.
IMPORTANT: ‘‘DEFINITY CALLMASTER II and CALLMASTER III
Instructions for Programming the Options,’’ 555-015-169, is a brief set
of instructions which includes procedures for setting the display for
1 or 2 lines and for controlling the Mute button. For the
CALLMASTER II, there are procedures for enabling or disabling the
Recorder Interface, and the Recording Warning Tones. For the
CALLMASTER III, there are procedures for setting the headset volume.
It is important that ONLY a service technician or the system manager
program these options. This document is orderable from the
documentation center listed at the front of this book.
CHECKLIST OF PARTS
The CALLMASTER II and CALLMASTER III voice terminal package
includes the following items:
Either
a CALLMASTER II Voice Terminal with Recorder Interface
or
a CALLMASTER III Voice Terminal without Recorder Interface
(Both of these CALLMASTER voice terminal models come in black,
misty cream, or white.)
Line Cord (7-foot, 8-wire D8W87 modular cord)
Button Designation Strips
(silver strips to be used with the black CALLMASTER;
international gray strips to be used with the misty cream and the
white CALLMASTER)
8