Filter
Top Products
Select Ring (and Ringer Volume) (Continued)
You can raise or lower the volume of the tone ringer under the following
conditions:
The CALLMASTER is on-hook, and the headset is unplugged
The voice terminal is off-hook on the external speakerphone
A call is ringing at the voice terminal
You are in the process of selecting a personalized ringing pattern for
your voice terminal.
To adjust ringer volume if necessary
1 To raise the volume, press the right half of the volume control button
labeled
;
to lower the volume, press the left half of the volume control button
labeled
.
Display shows the volume level:
Ringer L > > > > H
(There are eight possible volume settings. On the display,
one arrow indicates the lowest setting has been selected.
Eight arrows indicates the highest setting has been selected.)
SELF-TEST
To test the lights and ringer of your voice terminal
1 While on-hook, press
Select
Green light next to
Select
goes on
2 Press and hold
Drop
Test
Three groups of lights go on in sequence
Ringer sounds
Display is activated
3 Release
Drop
Test
to end test
Ringer, display, and lights return to pretest state; light next to
Select
goes off
22