Filter
Top Products
49
Appendix
Adding and replacing handsets
Your telephone can accommodate up to four cordless handsets. You can add
new handsets (E598-1 or E598-2, sold separately) to the E5921/E5922B/
E5923B anytime, but each handset must be registered with the same tel-
ephone base before use. Each handset must be registered separately.
The handset provided with your E5921 is automatically registered as handset 1.
Additional handsets will be assigned numbers in the order they are registered
(handset 2, handset 3, or handset 4).
The E5922B has two handsets automatically registered as handset 1 and 2. You
can register two additional handsets, which will be assigned number 3 and 4.
The E5923B has three handsets automatically registered as handset 1, 2 and 3.
You can register one additional handset, which will be assigned number 4.
The E5924B has four pre-registered handsets, so no additional handset can be
registered to it.
NOT REGISTERED
PRESS HNDST LOC
4 SEC ON BASE
HS X REGISTERED
Handsets purchased separately need to be registered to the
telephone base before use. When first purchased, all option-
al accessory handsets will show NOT REGISTERED on the
screen. The new handset may need to be charged for five
minutes before registering to the main telephone base.
To register a handset to your telephone base
1. Place the unregistered handset into the telephone base. If
PRESS HNDST LOC 4 SEC ON BASE
does not appear on the
handset screen after a few seconds, remove the handset and
place it in the telephone base again.
2. On the telephone base, press and hold HANDSET LOCATOR
for about four seconds (until the red IN USE light on the
telephone base turns on) and then release the button. The
handset will show
PLEASE WAIT...
and it will take about 10
seconds to complete the registration. The handset will show
HS X REGISTERED
and will beep if registration is successful.
NOTES:
1. If the registration is not successful, the display will show NOT REGISTERED.
To reset the handset, remove the handset from the telephone base and
place it back in. Try the registration process again.
2. You cannot register a handset if any telephone connected to the same tel-
ephone line is in use.
PLEASE WAIT...