Filter
Top Products
17
Telephone operation
Intercom call transfer
An external call can be transferred between the
following parties:
• From one handset to another handset (if you
have more than one handset).
• From a handset to the telephone base.
• From the telephone base to a handset.
Intercom call transfer
During a conversation, you can transfer the call to
another handset or to the telephone base.
1. While a handset or the telephone base is on
call, press INT on the handset ,or HANDSET
LOCATOR/INTERCOMINTERCOM on the telephone base.
The external call is automatically placed on
hold and TRANSFER TO: is displayed in the
handset screen.
2. Enter the destination handset number (1-4) or
enter 0 to intercom the telephone base.
3. The originating set's screen will show CALLING
HANDSET X. The destination handset will
ring, and its screen will show HANDSET X IS
CALLING.
NOTES:
• Before the intercom call is answered, you can cancel
the transfer and return to the external call by pressing
OFF/CLEAR, PHONE/FLASH, or INT.
• If the destination handset does not answer the intercom
call within 100 seconds, or if the other handset is in the
directory or call log mode, or out of range, the originating
handset will show UNABLE TO CALL TRY AGAIN on its
screen and will automatically return to the external call.
4. On the ringing destination handset or the
telephone base, press INT, PHONE/FLASH,
SPEAKER or any dial pad key (0-9, * or #)
on the destination handset to answer the inter-
com call. On the telephone base, press HANDSET
LOCATOR/INTERCOMINTERCOM, SPEAKER or any dial pad
key (0-9, * or #) to answer the intercom call.
INTERCOM TO: