Filter
Top Products
40
Answering system operation
1.
SETUP
3.
SETUP
-OR-
Press repeatedly until
desired feature is
announced (see list at
right).
Press until the
desired selection is
announced.
Press to set selection
and move to next
menu option.
Press to set selection
and exit menu.
2.
SKIP or
REPEAT
PLAY/STOP
Changing feature options
Menu features can be changed to program how
the answering system operates. Press SETUP
repeatedly to listen to each feature. When the
desired feature is announced, press SKIP or
REPEAT to change the setting. Press SETUP to
confirm your selection and move to the next menu
option or press PLAY/STOP to confirm your selec-
tion and exit the menu.
Feature options (Default settings underlined).
System announces: Feature description:
"Number of rings," cur-
rent setting, then "To
change the setting press
SKIP or REPEAT; to con-
tinue setup, press SETUP."
Options: 2/4/6/toll saver
"Call screening," current
setting, then "To change
the setting press SKIP
or REPEAT; to continue
setup, press SETUP."
Options: On/Off
"Remote access code,"
current setting, then "To
change the setting press
SKIP or REPEAT; to con-
tinue setup, press SETUP."
Options: (enter two-digit
code) 19
"Message alert tone,"
current setting, then "To
change the setting press
SKIP or REPEAT; to con-
tinue setup, press SETUP."
Options: On/Off
Choose the number of rings
before the system answers a
call. When toll saver is active,
the system answers after two
rings if there are new messag-
es, and after four rings if there
are no new messages. When
retrieving messages from a long
distance call, you may discon-
nect your call after three rings
so that long distance charges
will not be charged.
When on, you can hear callers
leaving messages, or answer
the call.
Enter a two-digit number (10-
99) for remote access from
another telephone (page 45).
When on, the telephone beeps
every 10 seconds when there
are new messages.
NOTES:
1. The message alert tone will beep only if all the conditions below are met:
Answering system is on.
Message alert tone setting is on.
There are new messages. Pressing any telephone base key (except HANDSET LOCATOR/
INTERCOM) will temporarily silence the message alert tone. If you press and hold DELETE in idle
mode, you will delete all old messages and the message alert tone will be temporarily silenced.
The message alert tone will be re-activated with the next incoming message.
2. Press and hold SKIP or REPEAT to increase or decrease the remote access code number
by 10.