Filter
Top Products
37
Turn System On
When the system is off, it answers after 10 rings, announces,“The machine is off,” and
beeps twice.
1 Connect with the answering system.
2 Press 00to turn the system on for both lines
— OR —
Press 01to turn the system on for Line 1
— OR —
Press 02to turn the system on for Line 2.
3 The system beeps twice and is ready to answer calls and record messages. If the
system beeps five times,the memory is full.
Review Call History
You can call the system and listen to the list of calls in call history. If a phone number in
call history matched a Talking Caller ID Announcement you entered,the system plays the
announcement you recorded instead of the phone number.
1 Connect with the answering system.
2 Press 92. The system announces the number of new calls for each line.
3 To review call history for both lines,press 0 to hear the most recent number in
call history
— OR —
To review call history for a single line,press 1 to hear the most recent number in
call history for Line 1
— OR —
Press 2 to hear the most recent number in call history for Line 2.
4 Press 4 to hear the next most recent number in call history
— OR —
Press 6 to hear the earliest number in call history.
5 Press 4 again to back up to an earlier number in call history
— OR —
Press 6 again to move foward to a more recent number in call history.
6 When you have reviewed the entire call history for that line,the system announces,
“End of Line 1 (or 2) calls.”
ANSWERING SYSTEM OPERATION
From a Remote Touch Tone Phone
1782_book_1AT&T 5/1/00 7:35 PM Page 37