Filter
Top Products
28
6 Press C to enter a telephone number digit,then select NEXT to move to the
next digit (enter seven digits for local or 10 digits for long distance)
— OR —
Press c to select PRIVATE CALLS or UNKNOWN CALLS
— OR —
To store a number from the call history,press o, then press C or
c until the screen displays the number you want.
NOTE: If you enter an incorrect digit, press D, then re-enter the entire number.
7 Select DONE
.
Record a Talking Caller ID Announcement
NOTE: You may record a new announcement over a previous one.
1 Press o.
2 Press C or c.
3 Use the softkey to select MATCH
.
4 Select LOCAL
.
5 Press C or c until the screen displays your chosen number.
6 Select RECORD
. Begin speaking in a normal tone of voice,about nine inches from
the unit. Your announcement can be up to five seconds long.
7 Select STOP
when you are finished. The announcement is automatically played
back for you.
Review a Talking Caller ID Announcement
1 Press o.
2 Press C.
3 Use the softkey to select MATCH
.
4 Select LOCAL
.
5 Press C or c until the screen displays your chosen number.
6 Press P. The system plays the announcement matched to this number.
7 Press P or select STOP
to stop announcement playback.
SET UP SYSTEM FEATURES
1782_book_1AT&T 5/1/00 7:35 PM Page 28