Filter
Top Products
11
3 Set the clock.
The screen displays the time (the default setting is 12 AM). To correct the setting,
use C or c to correct the hour, then select NEXT
to move to the
minutes setting; repeat to select AM or PM. Select DONE
when the correct time is
displayed.
4 Set the date.
The screen displays the date (pre-set to 1/01/00). To correct the setting, use
C or c to correct the month,then select NEXT
to move to the day
and the year. Select DONE
when the correct date is displayed.
You must set the date for the answering system once so that the day announced
with your messages is correct. This information is stored so that even when the
time is lost because of a power failure,the time, date, and day will be set correctly
with the first incoming call received after the power returns.
5 Adjust display contrast.
You can adjust the contrast of the display to one of eight levels. Press C or
c until the screen displays your desired setting. Select OK
to save.
6 Set Dial Mode.
This product comes set for touch tone dialing;if you have touch tone dialing service,
you do not need to set this feature. If you have pulse dialing service,you cannot dial
numbers with the phone set to touch tone. The current selection is displayed. Select
CHANGE
to switch to PULSE (dial pulse/rotary), then use the softkey to select OK.
7 Record Outgoing Announcement.
This system comes with a pre-recorded outgoing announcement. To record your
own announcements, see “Record Outgoing Announcement for a Line”in SET UP
SYSTEM FEATURES.
INSTALLATION
1782_book_1AT&T 5/1/00 7:35 PM Page 11