Filter
Top Products
18
Announcement Monitor for the System
This feature comes set to on so you can hear your announcement when the system
answers a call. You can reset the system so you won’t hear the announcement. The
setting you choose controls both lines, and is set using Line 1.
1 Press o.
2 Use the softkey to select ANS
SYS. The screen displays Set options for which
mailbox?
3 Select L1
. The screen displays your choice.
4 Select OK
until the screen displays Announce Monitor.
5 Select CHANGE
or press C or c to change the setting to On or Off.
6 Select OK
.
Audible Message Alert for the System
If you want the system to beep every 15 seconds to notify you that new messages have
been received,set the Message Alert to on (it is preset to off). The setting you choose
controls both lines. Set using Line 1.
1 Press o.
2 Use the softkey to select ANS
SYS. The screen displays Set options for which
mailbox?
3 Select L1
. The screen displays your choice.
4 Select OK
until the screen displays Msg Alert.
5 Select CHANGE
to display On or Off.
6 Select OK
.
SET UP SYSTEM FEATURES
1782_book_1AT&T 5/1/00 7:35 PM Page 18