Filter
Top Products
CHANGING AN OUTSIDE AUTO DIAL NUMBER
Auto Dial button, Slide the T/P switch to the P position, touch the Outside
Auto Dial button whose number you want to change, and dial the new
number. Return the T/P switch to the center position.
Chicago Office
SPECIAL CHARACTERS WITH AUTO DIAL
An Outside Auto Dial button can store up to 16 digits. For some types of
calls, however, you need to program an automatic pause, stop, or switch-
hook flash with the number. For example, if your MERLIN system works
in combination with a PBX system that does not immediately return a dial
tone after dialing 9 to get an outside line, you must program a pause after
the 9 on your Outside Auto Dial button, Or, when you program an Outside
Auto Dial button to dial a long-distance service sequence or call in a credit
card authorization code, you may need to program an automatic stop.
●
To program a pause into an auto dialing sequence, touch Hold
(pause).
●
To program a stop into an auto dialing sequence, touch Drop (stop).
●
To program a switchhook flash at the beginning of an auto dialing
sequence for Centrex/PBX codes, touch Recall, and then touch Hold
(pause).
AUTOMATIC LINE SELECTION
This feature controls the order in which the system selects a free line when
you make a call. If the first line in the selection sequence is busy, the system
automatically connects you to the line next in the sequence so you don’t
have to touch a line button to get a line. You can specify up to eight of
your line buttons for Automatic Line selection, and you can specify the
order in which the system should select them. Slide the T/P switch to the
P position; dial * *, touch the line buttons in the desired order, and return
the T/P switch to the center position.
555-1234
20