Filter
Top Products
Programming Your Console
Although most of your buttons must be used to represent lines or inter-
com numbers, you can customize your console to meet your special work-
ing needs. With short, simple procedures, you can program buttons for
convenient, one-touch access to features, and even customize the ring-
ing sound of your telephone. Keep in mind, however, that you cannot
reassign the Send Message or Night Service buttons or any of the per-
manently labeled dark grey buttons such as Conference, Hold, or
Speaker. Also, if you have a console for a large system, you cannot
reassign any of the Intercom Auto Dial buttons.
ASSIGNING CUSTOM FEATURES TO BUTTONS
You can assign a custom feature to any spare line button on your console
by using the following simple programming procedure.
●
●
●
●
●
●
●
Label the button(s) you want to program.
Slide the T/P (Test/Programming) switch toward you to the P (Pro-
gramming) position. The console rings every five seconds to remind
you that you are programming and that you cannot place or receive
calls.
Touch the button you want to program.
Dial the appropriate feature code (see table on next page).
Dial additional numbers (if required).
Program any other buttons you want to use for custom features.
Return the T/P switch to the center position.
18