Filter
Top Products
30 9112i IP Phone User Guide
Language
Language
Using the IP phone UI, you can set
the phones to use a specific
language to display.
When you set the language to use
on the phone, all of the display
screens (menus, services, options,
etc.) display in that language. Valid
languages for the IP phones
include English, French, Spanish,
German, and Italian. Default is
English.
Setting Language
You set the language on the IP
phone using the Options key
(
I) on the IP phone.
Note: A check mark displays beside the
language currently configured on
the IP phone.
Use the following procedure to set
the language for the IP phone
1. Press
I on the phone to
enter the Options List.
2. Select Language and press
U.
3. Use the V W to select a
language to display on the IP
phone and press U. Valid
values are In English (English),
En francais (French), En
espanol (Spanish), In Deutsch
(German), or In italiano
(Italian). Default is English.
A message displays "confirmed".
Note: The language you select is
immediately applied to the IP
phone UI display.
Troubleshooting Solutions
Why is my display blank?
Ensure that power is being
provided to your phone. Make sure
your phone is plugged into a
power source.
Why is my speakerphone not
working?
If you press the d /f button and
the speaker light flashes and you
do not hear dial tone through the
speaker phone, the Set Audio
option in the phone’s Options list
has been set up for headset use.
Press d /f a second time and if the
light goes out, the phone has been
set up to be used only with a
headset or handset. If the light
stays on steady and you hear dial
tone, the phone has been set up so
that you can alternate between the
speakerphone and the headset by
pressing d /f . See the section
“Customizing your phone” in the
Aastra SIP IP Phone 9112i
Installation Guide for instructions
on how to change the Set Audio
option.
Why can’t I get a dial tone?
Check for any loose connections
and that the phone has been
installed properly. For installation
instructions, please refer to the
“Installation and Setup” section in
the Aastra SIP IP Phone 9112i
Installation Guide provided with
your phone.
Why doesn’t my phone ring?
Check the ring volume on your
phone. It may be turned down or
turned off. To adjust the ringer
volume setting, press the volume
button when the phone is on-hook
and idle. For more information,
IP Phone UI