Filter
Top Products
/ IP Phone User Guide 53
Pairing and Unpairing Cordless Handset to Base
Upon success or failure of pairing,
one of the following will be
displayed on the handset and base,
respectively:
Successful Pairing of Handset
Failed Pairing of Handset
Pairing Failed Display
Pairing Success Display
Unpairing Handset
Unpairing of the handset can be
done from either the cordless
handset or the base. However, if
the handset being removed is out
of range from the base, the
unpairing is only performed local
to the device where the removal
process was initiated.
If the unpairing is only successful
from the local device, the
unpairing procedure will need to
be completed from the other
device.
1. On the 480i CT base press
%.
2.Select 11.Handset Pairing
3.Select Remove.
4.Select Done. The following will
be displayed on the screen.
Pairing
successful
Pairing failed
Try again
Cancel Pair
Options List
Done
Cancel
Pairing failed
Try again
Options List
Done
Pairing successful
Options List
Show
Done
9.SIP Settings
10.Phone Status
11.Handset Pairing
Options List
Show
Select
Done
Pair
Remove
Cancel
Options List
Done
Cancel
Attempting to remove
Wait...