Filter
Top Products
/ IP Phone User Guide 39
Customizing Your 480i CT Cordless Handset
Finding the Phones’s IP
Address using the Handset
You can find the IP address of the
IP phone’s Base Unit using the
handset. Use the following
procedure to find the IP address.
1. Press the
Âkey to enter the
Options List when the phone is
not in use.
2. Use the scroll keys
 andÏ to
scroll to the "Network" option.
3. Press
r to select the "Net-
work" option.
4. Use the scroll keys
 andÏ to
scroll through the network sta-
tus until the IP address of the
phone appears in the display.
5. Press
y when done.
Feature Keys on the Handset
You can program up to 15 feature keys on the 480i CT handset with specific
functions using the Aastra Web UI. The following table identifies the
functions available for all 15 handset keys and the default functions for
each key.
Handset UI
Key Function Description Default for:
Line 1 Line 1 key - Selects line one Handset Key 1
Line 2 Line 2 key - Selects line two Handset Key 2
Line 3 Line 3 key - Selects line three Handset Key 3
Line 4 Line 4 key - Selects line four Handset Key 4
Icom Intercom key – Enter handset list to select
handset to call
Handset Key 5
Dir Directory key – Activate directory feature Handset Key 6
Callers Callers key – Activate callers feature Handset Key 7
Xfer Transfer key - Activate transfer feature Handset Key 8
Conf Conference key - Activate conference feature Handset Key 9
Public Public key – Toggle between public & private
call mode
Handset Key 10
None No function is selected – this key is empty, no
label.
Handset Key 11
and 12
Line 5 Line 5 key (if available) - Selects line five. Handset Key 13
Line 6 Line 6 key (if available) - Selects line six. Handset Key 14
Line 7 Line 7key (if available) - Selects line seven. Handset Key 15
Line 8 Line 8 key (if available) - Selects line eight
Line 9 Line 9 key (if available) - Selects line nine