Filter
Top Products
18 / IP Phone User Guide
Handling Calls from the 480i CT Base Station
7.To drop the new party from the
conference, press = one
more time.
8.If you wish to exit the conference
leaving the other two parties
connected, disconnect by placing
the handset back on-hook or by
pressing N.
Picking up Calls
Press the line/call appearance
button for that call. If the phone is
connected to a call, pressing one of
the line/call appearance buttons
will automatically place this call on
hold before opening up a new line
for the new call.
To pickup a call:
1. Press the line/call appearance
button for that call.
2.Press N if you do not wish to
pickup a call. This cancels the
call pickup procedure.
Enabling/Disabling Microphone
and Auto-Answer
Use the following procedure to
enable/disable the microphone
and/or auto-answer on the IP
phone.
1. Click on Basic Settings->Prefer-
ences->Incoming Intercom
Settings.
The "Microphone Mute" field is
enabled by default (turned
OFF).
The "Auto-Answer" field is
enabled by default (turned ON).
2. To disable the "Microphone
Mute" field (turn ON), uncheck
the check box.
3. To disable the "Auto-Answer"
field (turn OFF), uncheck the
check box.
4. Click to save your
changes.
5. Click on Operation->Reset.
6. In the "Restart Phone" field
click to restart the IP
phone.
IP Phone UI
Tue
May
17 10:19am
00:27
Karen Batz
L2 Dial
>203
Pickup
Aastra Web UI