Filter
Top Products
/ IP Phone User Guide 11
Using your 480i CT Base Station
State-Based Softkeys
You can configure a specific state
to display when a softkey is being
used. Available states you can
configure for each softkey include:
• idle - The phone is not being
used.
• connected - The line currently
being displayed is in an active
call (or the call is on hold)
• incoming - The phone is ringing.
• outgoing - The user is dialing a
number, or the far-end is ring-
ing.
By default, the softkeys display in
the states of idle, connected,
incoming, and outgoing. All states
are enabled.
In the Aastra Web UI, the
operational states for each softkey
display enabled. To disable a state,
you uncheck the box for that
operational state.
The IP phone idle screen
condenses the softkeys. For
example, if you set softkey 12 as
the following:
Type: speedial
Label: Voicemail
Value *89
State: outgoing
then softkey 12 appears in
position 1 if no other softkeys are
set. A softkey type of "empty"
does not display on the idle screen
at all.
Connected State
The Connected State Screen will
appear when you are talking to
someone on the phone. Connected
State functions are available as
softkeys on the connected state
screen, as well as hard keys on the
phone. These softkeys and hard
keys allow you to handle calls, such
as transferring, conferencing,
placing calls on hold and more.
Tue
May
17 10:10am
10:17
202
L1 Connected
>Jay Lampton