Filter
Top Products
10 / IP Phone User Guide
Using your 480i CT Base Station
XML services. The phone performs
an HTTP GET on the URI created
by your system administrator.
You can set the following
parameters for object requests:
• xml application URI
• xml application title
The xml application URI is the
application you are loading into
the IP phone. You must get this
URI from your system
administrator.
The xml application title is the
name of the XML application that
displays on the Services menu in
the IP Phone UI (as option #4).
Softkeys as Customized Flash
Key
You can set a softkey to generate a
flash event when it is pressed on
the 480i CT or 480i CT handset.
You do this by setting the softkey
to "flash". The IP phone generates
flash events only when a call is
connected and there is an active
RTP stream (for example, when the
call is not on hold).
Softkeys as Customized Park/
Pickup Keys
The IP phone (including the
480i CT handset) have a park and
pickup call feature that allows you
to park a call and pickup a call
when required. There are two ways
a user can configure this feature:
• Using a static configuration
• Using a programmable
configuration (configure soft-
keys)
Note: The IP phone accepts both meth-
ods of configuration. However, to
avoid redundancy, Aastra Tele-
com recommends you configure
either a static configuration or a
programmable configuration.
The IP phones support the Park/
Pickup feature on the Asterisk,
BroadWorks, Sylantro, and ININ
PBX servers.
Reference
For more information about
configuring park/pickup on the
480i CT phone, see "Park Calls/
Pick Up Parked Calls" on page 21.
Softkeys as Customized Empty
Key
You can set a softkey to force a
blank entry on the IP phone
display for a specific softkey. You
do this by setting the softkey to
"empty". The soft keys are added
in order (from softkey1 to
softkey20) after any hard-coded
keys have been added. If a
particular soft key is not defined, it
is ignored.