3Com NBX 1105 IP Phone User Manual


 
26 CHAPTER 3: NBX BASIC TELEPHONE
To pick up a second incoming call while you are using your telephone:
1 Press Call Toggle button.
2 Your first call is put on hold, and you are connected to the second call.
a The telephone icon next to the 1 on your display panel blinks slowly.
b The telephone icon next to the 2 on your display panel is steady.
To return to the first call:
1 Press Call Toggle button again.
2 Your second call is put on hold, and you are reconnected to the first call.
a The telephone icon next to the 1 on your display panel is steady.
b The telephone icon next to the 2 on your display panel blinks slowly.
Programmable
Access Buttons
The NBX Basic Telephone has three programmable Access buttons. The
factory default settings for these buttons are (from left to right):
Feature
Call Toggle
Transfer
Your administrator can program these buttons for commonly used
functions. However, changing the settings for Feature or Call Toggle
buttons reduces your ability to use some of the NBX system features. For
guidance with programmable buttons, contact your administrator.
Feature
Press this button before you dial a feature code. See Appendix A for a list
of feature codes.
Call Toggle
The Call Toggle button is available only on the NBX Basic Telephone.
Using this button, you can manage two telephone calls at the same time.
See Status Icons on the NBX Basic Telephone
earlier in this chapter for
details.
Transfer
Press this button to transfer the current call to another extension or
telephone number. See Transferring a Call
in Chapter 5 for details.