Filter
Top Products
Paging 69
To park a call:
1 While you are on a call, press Feature button and 444, or press the
Access button assigned to Call Park.
2 Use the telephone key pad to dial a Call Park extension from the list
shown in Table 8
.
If you select a Call Park extension that is already in use, the display panel
displays
Park Cancelled and the call rings back to your telephone. You
can try another Call Park extension.
3 If you want to notify another user about the parked call:
a From an NBX Business Telephone, select an Access button that is
assigned for placing telephone calls, and dial the user’s extension, or
page them. See “Paging
” in the next section for details.
b From an NBX Basic Telephone, press the switch hook. When you hear
the dial tone, dial the user’s extension, or page them. See “Paging
” in
the next section for details.
To retrieve a parked call:
1 Pick up the handset of any telephone on the system.
2 Dial the Call Park extension assigned to the call.
Paging In certain circumstances, you can broadcast a message from NBX
telephones using the Paging feature.
The default codes, or extensions, that you dial for paging are shown in
Table 9
.
Do not press the Feature button on your telephone before you begin a
page, or you may activate a personal speed dial feature.
Table 9 Paging Extensions (Feature Codes)
Type of
Paging
NBX 100
(default codes)
SuperStack 3 NBX
(default codes)
External 620 6200
Internal 621 6201
Simultaneous 622 6202