Filter
Top Products
80 CHAPTER 2: INSTALLATION SCRIPTS
All services will start except DB_watchdog. It starts after the secondary
server is installed and the database replication process is initiated.
End of IP Conferencing Module Configuration
Sample vcx-setup
Script (Secondary
server)
This script programs the secondary server in a multiple server
configuration. The slave database is installed and initially hosted on the
secondary server.
The following options are selected in this sample script:
n Data server for presence and conferencing configuration (installs the
conference & presence database)
n Slave database configuration.
The vcx-setup script displays the current settings and then asks you if you
want to accept or update them. Sample answers are provided in bold
type along with explanations of those answers. Explanations are in italics.
To run the vcx-setup script:
1 Log in to the server as root.
2 Enter a password (default is pvadmin).
3 Press Enter (or Return).
-bash-2.05b# vcx-setup
Enter vcx-setup at the command prompt.
---------------------------------------------------------------------------
---------- Welcome to the VCX Linux Network Configuration Wizard ----------
---------------------------------------------------------------------------
This wizard sets up networking and related services.
Start of Network Configuration
Configure networking now? [yes] :
Press the Enter or Return key to accept yes as the suggested answer.
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------
VCX servers can use DHCP for automated configuration, but this requires
that the DHCP server is configured to provide the proper options. Unless
you know that your environment is set up in this way, you should say 'no'
here and configure static network parameters.